Note your house hot water system has one!
Pool Tool Anti-Electrolysis sacrificial anode - 50mm / 2" Tee [other fixings available, just ask]
Supplied with 1.5m x 4mm2 earth wire
EVERY pool with a heater should have one!
Protect valuable pool equipment such as heaters of all types - gas, electric, heat pumps against corrosion as a result of stray currents / galvanic corrosion.
Zinc will sacrifice before almost all other metals thereby limiting the damage to the common metals found in swimming pool and spa installations such as copper, cupro-nickel, stainless steel and titanium.
These metals can be found in heaters, pumps, some filters, handrails & steps, lights and other fittings in the pool.
It works by electrically bonding the zinc to the metals in contact with pool/spa water so that they are at the same potential. If there is an issue with galvanic corrosion present, the zinc will sacrifice protecting the other metals.
The earthing conductor must be installed in compliance with SAA wiring rules.
Contact us to discuss corrective action should galvanic corrosion be present indicated by excessive erosion of the zinc anode often resulting in a white colouration.
JUST LOOK UP OZEPOOL OR "ASK A QUESTION"